Simulating the model for consolidation of short bored pile in pure friction soil media
1 Department of Civil Engineering, Mahakal Institute of Technology and Management, Ujjain M.P. India.
2 Department of Civil Engineering, Ujjain Engineering College, Ujjain M.P. India.
Research Article
GSC Advanced Research and Reviews, 2021, 08(01), 066-081.
Article DOI: 10.30574/gscarr.2021.8.1.0145
Publication history:
Received on 08 June 2021; revised on 10 July 2021; accepted on 13 July 2021
Abstract:
In this paper, the analysis of a numerical study for consolidation analysis of short bored pile subjected to axial loads is presented. An analysis of short-bored pile is performed using finite element analysis software Abaqus CAE with the base of procured experimental data in sand media and a comparative analysis on Ansys FEA. Three models in combination of pile and footing system were developed by the application of incremental axial load for which the displacement upon each load was analyzed taking in consideration the stresses and strains. A parametric study was conducted to study the effect of load on and it’s observed displacement on the pile with or without footing. A close correlation is found between the results obtained by the FE models and the Experimental Model solution. The results indicates that the load bearing capacity of pile–footing system increases drastically when both acts together instead of acting individually.
Keywords:
Experimental Models; Friction Soils; Mohr-Coulomb; Abaqus CAE; Stress Parameters; Displacement Analysis
Full text article in PDF:
Copyright information:
Copyright © 2021 Author(s) retain the copyright of this article. This article is published under the terms of the Creative Commons Attribution Liscense 4.0
